Support Options
S-1 Embedment View Specifications
S-2 Surface Plate 37-60
S-3 Gull-Wing 37-80
S-4 Sub-Floor |
• FACTORY-ASSEMBLED SEAT PORTION
Materials
Slats: 2" x 3" nom. interior slats enclosed by 3" x 6" nom. face slats, separated by nylon spacers. Plated 1/2"-diameter interior steel rods capped with matching wooden plugs. Choice of Clear Douglas Fir or Ipe (all w/clear preservative treatment)
Supports: 3/8" x 4-1/2" steel bar, 3" square x 1/4" wall steel tube
Fasteners: Stainless steel
Finish: See our options page for choice of polyester powder finish (shown in Bronze).
Douglas Fir Bench
37-60D 6' long, 2 supports, 165 lbs.
37-80D 8' long, 2 supports, 193 lbs.
Ipe Bench
37-60I 6' long, 2 supports, 230 lbs.
37-80I 8' long, 2 supports, 280 lbs.
|
